Mando, Grogu, Bo-Katan HueForge
Mando, Grogu, Bo-Katan HueForge. In 100% infill, 0.08mm layer height, 0.16mm base layer. Uses PLA Kingroon Black, PLA+ Anycubric Gray, PLA Kingroon Silver, PLA Kingroon White. Instructions for filament changes are provided.
Mô tả
Mando, Grogu, Bo-Katan HueForge
In 100% infill, 0.08mm layer height, 0.16mm base layer.
Filaments Used: PLA Kingroon Black Transmission Distance: 0.6 PLA+ Anycubric Gray Transmission Distance: 2.5 PLA Kingroon Silver Transmission Distance: 5 PLA Kingroon White Transmission Distance: 5
If you don't have silver, use dark grey and light grey. Kingroon silver is more like grey.
Start with Black Swap to Gray at layer #7 (0.64mm) Swap to Silver at layer #12 (0.96mm) Swap to White for the rest at layer #18 (1.44mm).
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!