Pát gắn PSU SV06 kiểu bắt vít

Designed this support to suit the particular requirements of my printer's enclosure regarding  placement of the PSU and also a receptacle for one of those dimmer switches.

The PSU stays firmly in place without the need of a second bracket.

The two original M4x8 screws in the narrow side of the psu protrude too much. It's highly advisable to swap those for others with lower head  profile. Otherwise, the bracket holes will be too close to the wood border.
 

I've also published files for the regular mount without the bracket but with the dimmer hole and also with the bracket but without the dimmer hole in case anybody finds those useful.

Printed in sunlu black PLA

0.6 nozzle

0.2 layer height

Supports:  Enforced only (custom provided with the 3mf)