Skip to main content
F3D
Hộp đựng thẻ bài Pokémon - PokéBOX 1

1 image

Board Game

Hộp đựng thẻ bài Pokémon - PokéBOX

By JurasCh

Downloads
399
Likes
256
Views
4,411

Files 14 8.2 MB

  • box_body_1765737420.stlSTL · 70.9 KB
  • lid_-_clean_1765737421.stlSTL · 475.4 KB
  • lid_-_steel_1765737422.stlSTL · 702.5 KB
  • lid_-_psychic_1765737422.stlSTL · 736.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

PLA, 210°C,  layer 0,2 (the same high have the first layer), nozzle 0,4 mm

I recommend printing the box with the rounded side on top. Use an organic supports.  After printing, carefully clean the channel for the lid. In case of stucking use a tiny drop of oil or some lubricant. Dont forget to clean the oil from other parts. It may destroy the playing cards.

You can print the lid in two colors. If you change the color at high 1,40 mm, logo will have the first color (i used black) and the rest can be in another color. 

You can instal the lid through the point where channel have a little branch.

Added 2 parts version for printing without supports, and for smoothing the channels for the lid. Tolerance 0,3 mm.

Enjoy.

Read more Show less

Print spec

Formats
stl
Model files
14
Total size
8.2 MB
Largest file
803.7 KB

0 comments

See all