Chim Cánh Cụt 3D - Chỉ 6g Nhựa!

Only 6g of filament! 

This was printed with translucent PLA (but any Filament should work) :

• 0.3mm layer (The base is only one 0.3mm layer, but you can try 2 thin 0.15mm layer)
• No supports needed 
• 5-10mm/s first layer speed (to assure it will have good adhesion) 

once ready, carefully remove from bed and glue the beak together - use some clothing pin to secure it while the glue dries. 
 

Thin PLA is maleble and you can fold the wings to other positions :)