Khay Đựng Linh Kiện Nam Châm

I made a tray to put the small parts that were removed when disassembling the Prusa.

The size is 100mm long, 100mm wide and 15mm high.

Neodymium magnets were attached to key points on the tray so that the parts would not be lost. Also, the magnet has the function of attracting the tray to the spring steel plate and stabilizing the tray.

Neodymium magnets are circular, 13mm in diameter and 2.5mm thick.

I used PETG filament. No raft, no brim. no support. infill 20%.

In order to check the size of the hole that accommodates the magnet, I cut out key points and designed a test piece.