
Kênh gió quạt thổi kép 5015 cho Ender 3 V3 SE
- Downloads
- 1,314
- Likes
- 219
- Views
- 11,042
- Remixes
- 2
- Comments
- 0
Files 6 2.6 MB
- Duct_Left_Stock_1765830440.stlSTL · 392 KB
- Duct_Right_Stock_1765830441.stlSTL · 487.1 KB
- Short_Duct_Left_1765830442.stlSTL · 392 KB
- Short_Duct_Right_1765830443.stlSTL · 487.9 KB
Make a variant with AI
Build another version of this model.
Remix versions 2
Ống Quạt Phải Ender 3 V3 SE 5015ByMP_660455 · 12/28/2025
Quạt Trái 4010 Ender3 V3 SEByAncistrusCZ_1402020 · 12/15/2025
Details
- Model ID
- #95193
- Category
- Máy In 3D
- Published
Description
Yes, A remix of a remix.
TL;DR stock hotend printers use:
- Duct_Left_Stock.stl
- Duct_Right_Stock.stl
⠀
I really liked the shroud and my V3 SE was lacking in the cooling department. so after 4 test prints and a bunch of measuring I present the Dual 5015 blower for the V3 SE.
Please forgive my poor modeling skills I use sketchup so it's not perfect but it's functional-ish.
I used extra X axis motor screws from a kit, the left side you can use a larger diameter screw and tap threads into the plastic for the fan if you don't have a nut compatible with the motor screws. For the right side the extruder screw is roughly 5mm too long I used a plastic washer you can always use the right size screw too I didn't have one, the hole is shared by the fan and the bracket for mounting.
Print spec
- Formats
- stl
- Model files
- 6
- Total size
- 2.6 MB
- Largest file
- 487.9 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-
New -

-

-

-


