Hộp Bút Chì Màu Thu Nhỏ

This is a remix of Lyryln's Big Pen Box - only smaller :)

I scaled it down to 75% which saves a ton of print time plus seems sufficient for most school or kindergarten color pencil needs.

The other amendments are:

• combined the "metal" and the body part into one, multicolor is achieved by a simple color change at 61.6 mm / layer 308 (check in your slicer - the values given apply to 0.2mm layer height in PrusaSlicer)
• combined "Wood" and "Mine" sections into one, again - multicolor achieved through a color change at 50mm / layer 250 ( plus/minus, depending on the mine thickness you want to achieve)
• NoGlue construction - tip and body are held together by ball snap joints, just push in with some force (make sure the ball joints are properly aligned before you push!)
• and, yes, the thread is more conventional right-handed now :)

Supports are only needed for the arc overhangs on the “tip” model  

Thank you Lyryln for the idea and the models, great work (just too great -literally- for my needs)