Vỏ snap-fit cho bo mạch Libre Computer Le Potato

I designed a simple and sleek snap-fit case for the Libre Computer Board AML-S905X-CC or Le Potato. I've also included a few different top case designs for your choosing.

This case isn't meant to be constantly open so ensure you apply heat sinks or anything else beforehand.

The button can be a bit tricky to assemble, but I recommend applying stick tape on the outside of the top case, then inserting the button from the bottom, making sure the button makes contact with the tape for easy installation.

Optional: Use M3 x 4mm screws to secure the board to the bottom case... this might be good if you do plan on removing the case

Printing

• .2mm layer height

Update

12/16/22
Added “LP_Case_Bottom_Mountable_HS.stl” for the Libre Computer Board Mountable Heatsink. This model provides enough clearance for the prongs that come from the bottom of the board.

12/20/22

Edited the top cases to accommodate larger profile heat sinks(13mm)  + Added options for no button on top cases