Finger Board | Ván Trượt | In Một Lần

Fingerboard with Suspension! & passthrough axles keeping wheels from loose feeling wiggle motions with banded suspension giving way to axle twist.
 

High-friction surfaces like cardboard or leather work best for wheel movement. 

Quick print model, .225mm gap spacing on wheels to trucks. 

Version Information:

 — Version 2.2 → Complete redesign! Better trucks, better wheels, better ride.

— Removed v1.4 

— Version 1.4 →  Raised bottom designs - 

— Version 1.35.2 Updated gap on trucks to board from .135mm → .205mm, More Grip on Wheels with surface. Uploaded cover art to photos + wheel showcase. 

Old Designs 

— Version 1.3 Increases wheels and board thickness.

— Version 1.2 A thicker deck is also downloadable → .5mm increased thickness. 

— Version 1.1 Original creation after tweaking and test prints. 

• How to print this thing?  (Print on side with snug support 35*) 

1. Choose your favorite filament! 
2. Open up Prusa slicer and load model in.
3. Flip to side (Either side) 
4. Turn supports on up to 35 degrees. (Not recommended with brim)
5. Print at .16 layer heights & 100% infill, aligned retractions (This is a small model, please apply your normal bed adhesion improvements if you have trouble).
6. Enjoy!

Wheels have a tendency to break off with v2.2 on excessive pressure. 

Welcoming Summer