
NANO Temperature Tower Mk.52
- Downloads
- 111
- Likes
- 3
- Views
- 353
- Remixes
- 0
- Comments
- 0
Files 2 172.2 KB
- HEAT-TOWER-MK52_0.2mm_PLA_MK3S_6m_1765731908.gcodeGCODE · 165.7 KB
- temperature_tower_mk52_1765731908.stlSTL · 6.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #93483
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
A powerful nano-sized no-nonsense temp tower to help you fine-tune a profile for your filament. Inspect stringing artifacts from 230C (at the lowest layer) to 190C (at the highest layer).
* Uses only 150mm of filament - why waste perfectly good product?
* Takes under 6 minutes to complete - because time is money!
* 100% free under a liberal CC license - so you can remake it and share it however you want.
If you don't want to set up the tower yourself, I have included a fully configured Mk3S+ G-Code
Instructions;
Initial hot-end temp 220C
Layers and perimeters;
-perimeters; 1
-solid layers top; 1
-solid layers bottom; 1
-min shell thickness top; 0.2
-min shell thickness bottom 0.4
Infill; 0%
Supports; none
Add a height modification layer 24mm-25mm; Top solid layers;zero
Add custom g-code inserts as follows
Layer 2
M104 S230
Layer 5
M104 S220
Layer 10
M104 S210
Layer 15
M104 S200
Layer 20
M104 S190
Print spec
- Formats
- gcodestl
- Model files
- 2
- Total size
- 172.2 KB
- Largest file
- 165.7 KB












