Cây Thông Noel Lắp Ráp - Vừa Mọi Máy Prusa

The tree is 10 inches / 25 cm tall and weighs about 310 grams and takes 10 hours to print on a Prusa MK4. All parts fit on the Prusa Mini (or any other printer with a 180x180 bed) but the longer sticks have to be rotated 45 degrees.
 

Print "bricky_tree" first. You can set “Solid infill threshold area” to 550 for extra strength.
Then print “test_sticks” to see which one gives you the best fit. You can then print the selected stick from “full_sticks”, but make sure to use 3+ perimeters.

The 9.7 stick should be the best for most printers.