Nắp Thay Thế Cho Gọt Bút Chì Farber-Castell

By guserav_569431

Downloads: 47
Likes: 3
Views: 209
Remixes: 0
Comments: 0

Download all (.zip)· 2 files · 1.2 MB· 1.2 MB

Files 2 1.2 MB

farber_castell_pencil_sharpener_lid_1765723756.stlSTL · 869.8 KB
farber_castell_pencil_sharpener_lid_1765723757.fcstdFCSTD · 396.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #92477
Category: Đồ Gia Dụng
Published: 12/14/2025
License: Creative Commons — Attribution — Share Alike
Tags: replacement

Description

The model is a 1 on 1 replica of the Farber-Castell triangular pencil sharpener. It is modeled in FreeCAD using roughly the right tools to get the same shape. It was printed on a Ender 3 S1 Pro, which botched the dimensions a bit so there is a chance the vertical height of the first sketch in FreeCAD needs to be adjusted for a well calibrated printer by 1 mm.

This was printed in the orientation it has in the stl with support and then sanded down to achieve a smooth service. The model is designed such that it can be printed up side down as well using support. Though I recommend painting a deliberately smaller section of the lid with support as the support might get stuck otherwise.

Other than that this was printed with normal settings in PLA on the coarsest resolution as there is no need for detail.