Skip to main content
F3D
Giá đỡ màn hình X-Touch cho dòng Bambu Lab P1 1

5 images

Máy In 3D

Giá đỡ màn hình X-Touch cho dòng Bambu Lab P1

By jthomeo_1175944

Downloads
55
Likes
10
Views
1,010

Files 2 47 MB

  • xtouch_back_1765727614.stlSTL · 8.6 MB
  • xtouch_front_1765727627.stlSTL · 38.3 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I've bought a Bambu Lab P1S. This is a great machine, but the stock display is really awful. I came from a Creality K1 that gave nothing but headaches, but Klipper allowed some fun. Here is too limited. I didn't like the idea that I could not change the fan speed from stock panel, so I've decided to completely replace it. 

The goal here was to design something ass small as possible, and the display should be centralized inside the box. The SD card is still accessible. Power was provided from P1S USB to auxiliar input in the board, so the USB is not accessible. The connector for temp sensor is also blocked, because I use a Tuya sensor to measure temperature and humidity inside the printer chamber, but I may design a new version in a near future to allow it.

Maybe I will also release another version directly mounted to the front plate, but this design leaves some space to the stock display cable.

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
47 MB
Largest file
38.3 MB

0 comments

See all