Adapter Đai Ốc Trục Quay Cho Sovol SV06

Because I couldn't find a suitable replacement spindle nut, I built this simple adapter.

So I can install standard nuts. (TR8 x 4, with two thread starts) You only have to drill out two of the holes to 5mm if you get the standard one with a 16mm bolt circle, otherwise the screws won't align (Sovol bolt circle 17.5mm).

Here is a link with the spindle nuts I use: https://princore.de/products/trapezmutter?variant=39254414032995

what else is needed:

4 washers M3

4 M3 x 16mm screws

Category: 3D Printer Parts