Đế Gắn Camera Ring Stick Up Góc 45 và 90 Độ

I tried installing a new cam in the back yard, but I couldn't get the cam angled how I wanted due to how little it can move on the standard mount. I made this to hopefully fix the issue. Included are two mounts, one that is 45 degrees and another which is 90 degrees. Both have 4 sets of holes, rotated 90 degrees apart so that whatever orientation you put this in, one set will be somewhat close to what you need (so that “up” is still up.) There are 6 holes for attaching this mount to something, but depending on your application you might not need all of them.

My printer settings:
Ender 3 S1 with Inland PLA+ (although PETG is probably better for outdoor use)

.4 mm nozzle

.28 mm layer height

3 walls

20% infill (cubic)

200C hotend/nozzle

50C bed