Skip to main content
F3D
Hộp Đựng Túi Phân Chó Earth Rated Kẹp Dây Dắt 1

6 images

Đồ Gia Dụng

Hộp Đựng Túi Phân Chó Earth Rated Kẹp Dây Dắt

By AaronKelley_451572

Downloads
33
Likes
11
Views
499

Files 4 1.2 MB

  • Poop_Bag_Holder_Body_1765995927.stlSTL · 458.7 KB
  • Poop_Bag_Holder_Body_V2_1765995928.stlSTL · 435.7 KB
  • Poop_Bag_Holder_Cap_V2_1765995928.stlSTL · 137.8 KB
  • Poop_Bag_Holder_Cap_1765995929.stlSTL · 174 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a dog poop bag container that clips onto average round rope style leashes for dispensing bags from a roll. Many of these are of similar size/shape, but this one is designed specifically to hold Earth Rated bag rolls like the ones pictured here and linked below. Feel free to comment if it fits another brand of bags, or let me know the dimensions of your roll if it does not fit and I'll be happy to make additional versions that accommodate those as well.

https://www.chewy.com/earth-rated-compostable-dog-poop-bags/dp/36174

I recommend printing this in TPU.

UPDATE Dec-17-2023: Check back soon for the MKII version, featuring the v2 twist lock top with a new twist reel for rewinding unused bags back on the roll, a wider front dispensing hole for easier bag access, and a sloped top to help reduce the carrier from being knocked off inadvertently. I'll also be adding additional body designs to support other round leash dimensions, and a new rectangular clip style in several widths and thicknesses for those of you with flat leashes. Please feel free to leave me your comments with your leash profile dimensions in the meantime so I can be sure to add support for yours.

Printer Brand:

Artillery

Printer: 

Artillery Sidewinder X1

Rafts:

No

Supports: 

Doesn't Matter

Resolution:

.2

Infill: 

10

Filament: Tronxy TPU Orange

Notes:

While I printed mine in TPU, this may also work in something like PETG which has a small amount of flexibility. I'd probably steer clear of PLA due to it being more rigid.

Ideally, you'll want to use TPU since it is impact resistant and the top cover will be easier to take on and off with some flexibility. I do have an untested v2 version I'll also upload which should allow for easier removal of the lid, particularly on stiffer filaments like PETG. As mentioned, I haven't had a chance to print and test the latest design yet, so let me know if you have any feedback good or bad on it. Otherwise I'll update this section next time I need to print one and get a change to use the v2 version myself.

Category: Pets

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
1.2 MB
Largest file
458.7 KB

0 comments

See all