Dummy 13 Tapo C110

Please read before printing:

This is work in progress. I’ve been inspired by @soozafone https://www.printables.com/pl/model/593185-dummy-13-printable-jointed-figure-beta-files design and after printing few other remix I ended up making something with my own twist.

For sure go to @soozafone page and like his model. As it’s mostly his design (printed 250% scale) with different neck adapter to accommodate Tapo C110

for convenience I will be adding links to his design here.

Hardware:

• Tapo C110 (it should work with earlier model but I only own this one)

• Small Philips screwdriver (to partiality disassemble camera)

Printing

First of all grab Original files from here:

https://files.printables.com/media/prints/593185/stls/4800871_f7aa7ce5-5b43-4a4a-874c-2c37578da490_0cb8700f-341e-4d05-a502-63b61c06ef89/all-armor-parts.3mf

https://files.printables.com/media/prints/593185/stls/4800872_a82f5df2-0efd-4a98-b22c-4adca3cc0db8_1c0702be-3746-4646-8591-e2714c89225f/all-frame-parts.3mf

And print them in 250% scale using imbedded settings.

small disclaimer you don’t need few parts (neck & head pieces) but still highly recommend doing them.

Second thing you need to decide what type of neck you want:

• short neck (recommended)

• long neck (if you feel like you need more movement)

For this step you can use Any material. You can get away with PLA but you’ll be better off using more durable filament (PETG, ASA etc.).

20-30% infill.

Assembly

1. To assemble you first need to disassemble (XD) your Tapo: 

• remove two screws from bottom of the base and remove bottom part of base.

• remove rubber plug from leg.

• remove one screw from inside the leg.

2. Use YT video provided by @soozafone to assemble body (you can skip neck part for now)

https://youtu.be/Rwu3UP0cHZw?si=p1oLXLNGXClq2yIw

3. Insert into body neck adapter of your choice for Tapo.

4. Put camera into remaining hole (it’s snug fit).

5. Go here: https://www.printables.com/pl/model/593185-dummy-13-printable-jointed-figure-beta-files and give a like to OG poster.