Dụng cụ gắn ốc nhiệt Heat set insert rig

This is a remake of two different modells.

This model is adapted to use 608 bearings and Leader Pro 80w, soldering iron.

https://www.prusaprinters.org/de/prints/76059-jo-presser-threaded-insert-heat-press

https://learn.adafruit.com/heat-set-rig/overview

I have taken different parts that i could use with 608RS bearings. 

• Roller Carrige

4x ball bearings 608RS

4x m6 nuts

4x m6 screws

2x m4 inserts

2x m4 screws (to fasten arm)

• Arm

2x m3 inserts

2x m3 screws 10mm (to fasten solder pen holder)

• Solder pen holder

4x m2.5 10mm screws

4x m2.5 inserts

• Pulley idler

1x bearing 608RS 

4x m2.5insert

4x m2.5 short screws

1x m3 insert

1x m3 screw

(I used some washers so that the bearing was fixed)

• other

Use some string to connect roller carrige to the weight holder

• Iron holder

4x m2,5 insters with screws

and a small pieace of resistance band to make the soldering iron from falling out. Use what you have to fixat it properlly in the holder.

• Soldering Iron

https://www.amazon.de/-/en/Soldering-Professional-Adjustable-Temperature-Switch/dp/B0B1TKJSS2/ref=sr_1_1?crid=2HH5OO3E9IBSB&keywords=leaderpro%2B80w&qid=1701992828&sprefix=leaderpro%2B80w%2Caps%2C83&sr=8-1&th=1

As counter weights I have used nuts with a diameter of 29.9mm