Móc Treo Túi Tái Chế - Bản Mộc Mạc

Materials:

• 1 small nail for hanging
• Hammer

Print:

• PLA or stronger filament (PLA was sufficient)
• 0.4mm nozzle
• 0.2mm layer height
• No brim

Instructions:

• Print part
• Hammer the nail about 2mm into the wall to make a divot where you want to hang it
• Put the tip of the nail through the part's nail hole and into the divot you created
• Hold the part flat to the wall and hammer the nail in all the way