Vỏ Case Konnected Alarm Panel Pro

This is a case for the Konnected Alarm Panel Pro.

Features

• Wall-mountable via countersunk screws through the base
• Fits M3 standoffs, screws & nuts
• Access to all of the board's connectors: USB, RJ45, power pins, alarm pins, etc

Board Screws & Stand-offs:

A number of variations of screws and stand-offs will work. The base is recessed for M3 hex nuts. I used the following the combinations:

• Base underside: I used M3*6+6 but you can use regular M3 hex nuts
• On top of alarm board: I used M3*15*6
• Lid screws: I used M3*6

Wall Mounting Screws

2 x 4mm countersunk woodscrews or similar will work well and be countersunk to avoid contact with the board.

Printing

The photos show it printed in Prusament PLA Vanilla White on an MK3s at 0.2mm resolution. No supports needed.