Chậu cây treo tường Ikea Skadis

Inspired by some other available living paintings. But those where or very expensive or just very small.

As I had an Ikea Skadis pegboard with no purpose. I came to the Idea of making one of my own.

For now I got only a render picture(without plants as I'm not skilled enough to add them correctly), as It will take to long to print and make it complete with a real picture.

You can make your own design with the different size plant boxes/plant holders.

Also included the Fusion 360 files if you want to make adjustments.

everything can be printed without supports

Print the plantholders in the right orientation on the correct side with 3 perimeters and 100% infill with random starting lines, to ensure it will not leak any water through.

Print the connector as shown on the picture, so it wil have the right allignment for the weight contribution, also print with 3 perimeters and an infill of 50%, so it will still have some flex in it to connect it to the pegboard.

To put it on the pegboard:

First put the connector on the pegboard in the right holes. it has an tight fit, so it stays good in place

Than attach the plantbox to the connectors, it will take a bit of force, but than it will be secure.

To remove: push the plantbox up and it will come loose, than you can remove the connectors from the pegboard.

Edit: 05-05-2021: uploaded photos of my completed living painting.