Remix chân kẹp quạt bàn 120mm

I wanted to put this fan on a bed side table, with the output facing downwards towards my head. Tilting the fan this way had the tendancy to make the fan unstable, plus any vibrations made the fan walk across the table surface.

Therefore, I used the STEP file from the original design to model a simple clamp to suit any 18.5mm thick table. A TPU part is included to protect the table and dampen vibrations.

Parts are oriented correctly and do not require support. The TPU liner slides into the clamp and then bolts to the rest of the parts from the original design.