
Large file collection Mỹ Thuật
Biển hiệu HoHoHo Giáng Sinh Có Thể Phát Sáng
- Downloads
- 131
- Likes
- 71
- Views
- 858
- Remixes
- 0
- Comments
- 0
Files 25 8.1 MB
- HoHoHo_All_for_reference_1765700785.stlSTL · 3.6 MB
- o1-insert_plain_1765700786.stlSTL · 51.2 KB
- o1-insert_beard_1765700787.stlSTL · 53.4 KB
- o1-insert_buckle_1765700787.stlSTL · 39.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #83783
- Category
- Mỹ Thuật
- Published
Description
Add some holiday vibes with this Light Up HoHoHo sign.
This is an assembly, that is printed in parts and then glued and snap fit together. There are a lot of parts in the Printable but you do not need all of them. One Set is for multi-material printers like the Bambu AMS and Prusa MMU. The other set is for standard printers.
Steps
- Print all the frames in black PLA
- Print all the H inserts in the colors of your choice. I chose Red Green White. Note: the red and green inserts (H1 and H2) have a thinner face to allow more light transmission.
- Print the O inserts
- For Multi-Color Printers use the files named “mmu_ams.”
Note: When you open one of the O's in Bambu slicer or Prusa slicer right-click on the object in the list and click “separate into parts.” This will make colorization way easier. - For Non-multi-color printers, use the separated parts versions and print the pieces independently. You will then glue them to the appropriate O insert.
- For Multi-Color Printers use the files named “mmu_ams.”
- Glue all the frames together using CA glue, and CA accelerator. I find putting them on a workbench and pressing them together helps alignment.
- Run Leds through the inside, and I recommend tacking spots with hot glue to ensure the LED strip does not come loose
- Install the Power Switch and wire up the LED's. I use USB cords to power this as I used 5V LEDs, you can use 12V or whatever you like. Or you can skip lights altogether.
- Press fit the inserts into the frames. Be careful it is a tight fit and this is by design, just push them slowly and evenly.
Enjoy! Happy Holidays 🎅🎄
This was inspired by @meafdesigns HoHoHo Sign.
Print spec
- Formats
- 3mfstl
- Model files
- 25
- Total size
- 8.1 MB
- Largest file
- 3.6 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-

-

-

-

-

-


