Nút Bịt Ống Hơi Ren 3/4" BSP

I needed to quickly plug off the end of a ¾" BSP hose on a Sunday after the hardware store had closed.

3D-printing to the rescue!

This male plug for ¾" BSP fittings (washer supply hoses, etc.) did the trick.   

Print with at least 5 walls and 7 top layers for best results.   

Printing with a material such as PP, PETG, ASA, or ABS will likely yield better waterproof results.   

---

NOTICE: If you post remixes online --- Printables, Thingiverse, Cults, etc. -- you must include attribution and link back to this original design. Do not claim the original design as your own.