Thanh giằng chéo cho GERTON dùng OBSERVATÖR

Print 2 pairs out of PETG with 0.4 or 0.6 nozzle, increase perimiters to at least 4, infill default or 100%.

Additional parts required for one cross-brace:

• 1x IKEA OBSERVATÖR
• 4x M4x20 Hex
• 4x M4 Hexnut

f3d file included to adjust to custom round legs, use parameters leg_diameter_1 and _2. 
Ensure you keep enough clearance for the ring to fit.

2023-12-09: Added tangential mount versions for the long part of the table. 
Similar as the others, here insert M5 square nut and get some 165cm aluminum strips with 5.2mm hole (about 10mm from the end) and mount them with a M5x10 screw.