Khuôn Jigs Cắt Uốn Dây Nhảy

This includes two models: one for cutting wires to length; one for bending wires to create jumpers. The jigs should accommodate AWG 22 and AWG 24 solid wire.

A cut wire will be 16mm longer than the jumper. 

To make a jumper:

1. cut a piece of wire to the length using the “CUT” jig
2. strip 8mm from each end
3. bend the jumper using the “BEND” jig

I've included the OpenSCAD source in case you want to customize it for your own use.