Skip to main content
F3D
GIÁ ĐỠ THỚT 1
GIÁ ĐỠ THỚT 1
1 / 7

7 images

Đồ Gia Dụng

GIÁ ĐỠ THỚT

By Josefson_162880

Downloads
46
Likes
7
Views
404
Download all (.zip)· 8 files · 342.6 KB· 342.6 KB

Files 8 342.6 KB

  • side_holder_print_4x_1765442459.stlSTL · 40.3 KB
  • Bottom_print_2x_1765442460.stlSTL · 53 KB
  • side_holder_print_4x_1765442461.3mf3MF · 11.6 KB
  • Bottom_print_2x_1765442462.3mf3MF · 13.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#81783
Category
Đồ Gia Dụng
Published

Description

A model of a cutting board holder for the kitchen.

Dimensions are shown in the photos.

Recommended material PETG. Choose non-hazardous materials that do not absorb moisture!!!

The layer height, fill, number of circuits and nozzle diameter can be chosen freely (I do not recommend less than 2 circuits and 5% fill), the model in the photos is printed with a nozzle diameter of 0.6 mm with a layer height of 0.4 m.

You will also need 8 M3x8 or M3x10 allen head screws. The screws are covered and recessed in the holder, so they will not be in contact with the damp substrate the holder is standing on.

I recommend to use PETG material, choose non-toxic materials that do not absorb moisture!!!

Recommended nozzle 0.6mm, layer height 0.4mm.

Any setting is possible (the number of perimeters should not be less than 2, the filler to use 5% or more).

Read more Show less

Print spec

Formats
3mfmtlobjstl
Model files
8
Total size
342.6 KB
Largest file
126.9 KB

0 comments

See all

F3D uses essential cookies so the site works. Accept all also turns on marketing cookies for traffic and ad measurement; Essential only does not. You can change this in Cookie settings. Read the cookie policy