Skip to main content
F3D
MK4 xLCD Support Cover (Canh giữa hoàn hảo) 1

3 images

Máy In 3D

MK4 xLCD Support Cover (Canh giữa hoàn hảo)

Remix of Tấm che LCD cho Mk4 By Eric_Recheck

By Eisvogel

Downloads
244
Likes
42
Views
1,105
Remixes
1

Files 2 65.7 KB

  • xlcd-support-cover_1765448838.3mf3MF · 39 KB
  • xlcd-support-cover_1765448844.stlSTL · 26.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

As Eric said: This is a simple cover for behind the xLCD screen of your MK4 printer.

However, the main model has one major flaw, which is the off-center alignment as the xLCD is not mounted symmetrically. With this remix I adjusted the left and right spacing to match the xLCD positioning. Additionally it is specifically designed to be printed upright instead of flat on the bed to show a beautifully layered texture instead of the smooth or textured finish of the build plate. This way the layered appearance of the xLCD cover itself is extended to the frame. I guess it is a matter of taste. If you prefer, the model still prints fine flat on the bed as well.

For printing I recommend the 0.2mm SPEED profile with 15% infill as per the default settings. When printing upright the print takes around 12 minutes.

To install this cover slightly loosen the four M3 bolts in the frame holding the xLCD assembly in place. Slide in the support cover. It should fall right into place. Tighten the bolts again for a perfect press fit. Enjoy the new clean look of your MK4!

Read more Show less

Print spec

Formats
3mfstl
Model files
2
Total size
65.7 KB
Largest file
39 KB

0 comments

See all