
Giá đỡ cuộn sợi có thể điều chỉnh
- Downloads
- 876
- Likes
- 171
- Views
- 8,987
- Remixes
- 1
- Comments
- 0
Files 8 32.9 MB
- adjustable-spool-holder_0.2mm_PLA_MK3S_10h28m_1765655666.gcodeGCODE · 29.8 MB
- side-plate_1765655660.stlSTL · 151.4 KB
- bottom-plate_1765655661.stlSTL · 294.2 KB
- gear-thin_1765655662.stlSTL · 565.7 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #80290
- Category
- Ý Tưởng Khác
- Published
- License
- Creative Commons — Attribution
Description
This is a fully adjustable spool holder designed to be screwed down onto your enclosure. It can take spools from 40mm to 180mm width (almost any spool you can find on the market!). A gear system links the left and right side together, if you move one side the other moves as well. I recommend you use some kind of filament guide like this one: https://www.prusaprinters.org/prints/58073 for the popular IKEA Lack enclosure.
Printed parts:
- 1x Bottom Plate.stl
- 1x Top Plate.stl
- 2x Side Plate.stl
- 4x Rack.stl
- 4x Roller.stl
- 2x Gear thick.stl
- 1x Gear thin.stl
Hardware:
- 9x 608 bearing (608ZZ or open; Sealed bearings might not work)
- 4x M5x16 socket head screws + nuts
- 2x 4mm countersunk wood screw
For Remixers:
The STEP file: https://github.com/testudor/adjustable-spool-holder
Changelog:
- 22.01.2020: Made recess holes for M5x16 a little wider and less deep
Print instructions:
Use 40% infill for racks, print everything else in 15%. Depending on your print's dimensional tolerances you might have to glue the racks into the side plate or have to sand some pieces until they fit.
If you own a Prusa MK3/MK3S you should not need any sanding/glue at all.
Print spec
- Formats
- gcodestl
- Model files
- 8
- Total size
- 32.9 MB
- Largest file
- 29.8 MB



