Giá Đỡ Treo Center Punch

After I designed my magnetic drill chuck key holder, the world of attaching things to my drill press grew considerably. So, since the Center Punch is often something I'm looking for, I designed this simple brack that attaches to it and can hang from the previously designed holder.

I did use fasteners to hold it on, which wasn't my first choice, but I didn't want it drifting every time I hit the punch with a hammer. 

Hardware

• Center punch with a 9.5mm shaft diameter.
• 2 x M3x8 countersunk screw.
• 2 x M3 square nut.

Printing Tips

• Sliced file for site metrics only.
• You will likely want to use a brim on this, but you might be able to get away without one.