Bộ đường ray Hot Wheels Uốn lượn Đổ vỡ FTB65

A couple of the mounts have been broken or lost and it seemed like something fun to try and reproduce. I did not do the twist insert action, instead you have to take apart the track portion and slide it on, but its a tight fit on the track and on the ball.

Seems that the set has 7.5mm and 7.25mm ball joints, so you might need both kinds depending on what you need to replace.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.28

Infill:

25%

Filament: Generic PLA Red

Notes:

I tried printing these with both supports and without, either way you will need to remove a bit of material from inside the piece, which is primary reason why the bottom has a hole, but whether you use supports or not, they print pretty nicely and work well.

Category: Toys & Games