
Magnetic Blackboard Chalk-Holder
- Downloads
- 22
- Likes
- 3
- Views
- 214
- Remixes
- 0
- Comments
- 0
Files 2 325.8 KB
- chalk-holder_1765657530.stepSTEP · 94.5 KB
- chalk-holder_1765657531.stlSTL · 231.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #77330
- Category
- DIY
- Published
Description
A magnetic holder for blackboards that fits 2 packs of Jolly brand chalk packets.
Can be easily modified to fit other objects i.e. whiteboard markers or whatever you need to hold on a magnetic surface.
In my case the packets were roughly 53x83x22 mm in size.
This design uses 9 magnets that are 5mm in diameter and 3mm thick.
Depending on the wieght you want to hold with it your number of needed magnets may vary. For me 9 magnets hold up the 270g alright.
The magnets are inserted in cavities that have a 0.6mm thick top and bottom, so you have to pause the print just before the cavities are closed which for me with a 0.2mm layer height was at layer 37 (see picture).
I printed the model lying on the side of the magnets, which means it needs supports but makes the insertion of the magnets easy.
! Keep in mind to remove the supports in the magnets' cavities !
Printed on my Bambu Lab P1S in eSun matte black PLA
Print settings:
0.4mm nozzle
0.2mm layer height
3 top/bottom layers
2 wall loops
15% infill
Print spec
- Formats
- stepstl
- Model files
- 2
- Total size
- 325.8 KB
- Largest file
- 231.3 KB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-

-

-

-

-

-


