Adapter ống kính Mamiya Press sang Sinar

use a 85*1.5mm for better seal, may not necessary for smooth plate, or just use 704 gule. 

8pcs M3*12countersunk screw & nuts

1pcs M3*8 nylon screw for lock

if the hole is lose, use M3.5(6# in ANSI) instead of M3 nylon screw.

USE SUPPORT only ON PRESS MOUNT. #Cancel tower for support can stop supporting the logo.

使用了85*1.5mmO圈加强密封遮光，光滑打印底板不一定需要，可以用704替代

8套M3*12沉头螺丝和螺母，一个M3*8手拧尼龙螺丝锁定镜头。如果镜头锁定的孔比较松可以试试换成M3.5，也就是美制6#螺丝。

只需要在卡口处用支撑，关闭支撑的塔的功能可以避免支撑logo。