
Hộp đựng thuốc 7 ngăn cho cả tuần
- Downloads
- 1,096
- Likes
- 122
- Views
- 4,725
- Remixes
- 2
- Comments
- 47
Files 27 11 MB
- Pillendose_20mm_Woche-1x-Box_1766425710.stlSTL · 302.4 KB
- Pillendose_Woche-20mm-2x-Box_1766425711.stlSTL · 570.4 KB
- Pillendose_30mm_Woche-1x-Box_1766425712.stlSTL · 869.8 KB
- Pillendose_30mm_Woche-2x-Box_1766425712.stlSTL · 1.6 MB
Make a variant with AI
Build another version of this model.
Remix versions 2
Hộp Đựng Token "Harmonies - Động Vật"ByGuybrush17_1931987 · 12/25/2025
Nắp trống cho hộp thuốc PillenspenderByetfly · 03/09/2025
Details
- Model ID
- #7558
- Category
- Ý Tưởng Khác
- Published
- License
- Creative Commons — Attribution
Description
Dec 17, 2022
Please read the entire description before downloading!
This is a pillbox with 7 compartments for the whole week.
Approximately 20mm x 20mm x 136mm in size.
For the hinge I use a piece of filament with ø1,75mm that is about 1cm longer than the box. After printing, the holes must be drilled out with a 2 mm drill. The filament is pushed through the box and all the lids and then slightly melted at the ends. Ideally, just enough to fit into the small recesses.
November 15, 2024, Complete overhaul:
The files and file names were very chaotic in the meantime, so I completely reorganised and renamed the models.
I also created a double version, e.g. for taking tablets in the morning and evening.
All boxes are now available in heights of 20mm (standard), 30mm and 40mm.
The lids are available with the abbreviations for the days of the week in German, English and Spanish.
All lids fit all boxes.
All models are available as stl, step and x_t (Parasolid).
December 19, 2024
Added some lids for a french box:
- Pillendose Deckel Ma
- Pillendose Deckel Me
- Pillendose Deckel Je
- Pillendose Deckel Ve
Together with the already existing lids you can now print a french pillbox :)
December 23, 2024
Again a correction, I'm sorry!
Don't know how this could happen, but higher versions 30mm and 40mm did not fit to the lids, now I have corrected them and uploaded again, sorry.
Now really the lids fit to all sizes of the base parts.
January 24, 2025:
There were still wrong lids in the step files, I must have overlooked them. But now I've corrected them.
----
Please take a look at this as well:
https://www.printables.com/model/352893-pillenspender-pill-dispenser-v2
Almost the same box with modified lids to use with transparent material.
Print Settings
Supports: No
Resolution:0,20mm
Infill:40%
Filament: PLA
Print spec
- Formats
- stlzip
- Model files
- 27
- Total size
- 11 MB
- Largest file
- 1.7 MB


