Skip to main content
F3D
Artillery Sidewinder x1 - Chân đỡ Gantry Bản Remix4 cho BL… 1

8 images

Máy In 3D

Artillery Sidewinder x1 - Chân đỡ Gantry Bản Remix4 cho BL-Touch

By Flapstaart_1484900

Downloads
40
Likes
1
Views
335
Comments
1

Files 3 524.9 KB

  • 1-Right-Triangle-Support-v2_1767459631.stlSTL · 162.7 KB
  • 1-Left-Triangle-Support-v2_1767459632.stlSTL · 169.6 KB
  • Left-Triangle-Support-v3_1767459633.stlSTL · 192.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#73763
Category
Máy In 3D
Published

Description

As I have a BL-Touch I have my bed at stiff as possible, running it lower than original. On the original version I hit the braces 1,5mm before actually reaching 0.

Really the only adjustment is removing a few mm from the top of the braces to make room for the Z-axis get lower. It's not perfect but it should work. "Should" because I still need to reprint after adjusting the original.

Because I am printing at a high layer-width I adjusted the screw-holes to have a tiny bit more space for screws to enter which made for a perfect fit.


Added Left-Triangle-Support-v3. This version is 5mm lower than the v2 to allow for a X-belt tensioner to be installed (https://www.thingiverse.com/thing:4726382).

I moved down the sides "hugging" the 2040 extrusion as much as possible and lowered the top-middle bit by 1mm to minimize the impact on the structural integrity but still make sure the t-nuts can rotate.

Printer:

Artillery Sidewinder X1

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

30%

Filament:

Azurefilm PETG

Transparent Dark Blue

Category: 3D Printer Parts

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
524.9 KB
Largest file
192.6 KB

1 comment

See all