Snakes and Ladders - Travel Edition

3D MODEL DESCRIPTION

easy to print and magnet accessible for easier travel games

will require an MMU setup like Prusa, Bambu or similar systems for 3-4 colors

included .3mf file is easy to customize the colors just goto the Objects tab and select the components and their desired color no need to use the paint function!

Large board requires a 240x240 bed, will add a 220x220 bed once i have it created.

3D PRINTING SETTINGS

recommended to print face down for better tops (if you have a well calibrated 1st layer)

I suggested that you print the tile bottoms separately and insert magnets in post unless your machines nozzle doesn't attract the magnets. Than just glue the 2 together and insert in the frame (with glue to secure them permanently)

• 0.2mm Layer Heights
• 2-3 Walls
• 4/4 or 5/5 Top/Bottom layers
• minimum tolerance of 0,25mm