Mô hình Cục Shit "Poop" Nam Châm - In 3D

I was making a poop emoji (as one does…) and this happened on the way. There are hollow, solid and separate magnetic versions supporting either 5x2mm or 6x2mm disc magnets. CAD assets are included, in case you need to re-use this poop in another work.

Printing

There are hollow, solid and magnetic poops available in 3MF format depending on your preference. The model is large and is intended for you to scale down in your slicer (or CAD software). The exception is the magnetic version which should be printed at the supplied scale.

The poops are made to be printed directly on the print bed in their normal orientation with no supports. I used a 0.4 nozzle with a 0.2mm layer height for everything. The model will benefit a smaller layer size for detail.

The plastic I have used in my print is Extrudr NX-2 matte brown.

Magnets

If you have chosen a magnetic version for safety purposes put a small amount of glue on the magnets before insertion. 

The gap may or may not be tight depending on tolerances on the magnet/hole so the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.

Versions

2023.11.02: Add poops supporting 5x2mm and 6x2mm disc magnets

2023.11.01: Initial version

Support

If you like our poop please consider joining our club here on Printables!