Bộ G-code Zen (dành cho Prusa MINI+)

This is a collection of models and a *.gcode file for Prusa MINI+ printer to transform the Prusa MINI+ into a Zen gardener.

1. print the Zen garden tool (it is a 7mm bit compatible elongated tool that fits on your Prusa MINI+ nozzle)
2. print the Zen garden basin and leave it attached to the steel sheet on the print bed
3. Carefully fill the Zen garden basin with your sand of choice and meditation (luckily the sheet is detachable)
4. “Print” with the supplied “The_Zen.gcode” and your Prusa MINI+ will transform into a little Zen gardener and create a Zen pattern garden on the surface of your supplied sand. (put the tool on the nozzle when printer waits at X 180,Y 0 for 20s)
5. Watch it do its work and meditate.

(This is an experiment in Zen and 3D printing fun; please update, optimize, and expand on the GCODE and report back; no extrusion, no heating)

(The tool is 13 mm high, approximately 10 mm below the nozzle end; the garden basin walls are 14 mm high and the bottom is 2.2 mm thick).

I wish You enlightenment.