Skip to main content
F3D
Huy hiệu "Loki làm Tổng thống" có đế nam châm 1

3 images

Cosplay

Huy hiệu "Loki làm Tổng thống" có đế nam châm

By hitjim

Downloads
72
Likes
16
Views
488

Files 2 571 KB

  • Loki_For_President_Button_1766390075.stlSTL · 540.8 KB
  • Loki_For_President_Button_-_back_1766390076.stlSTL · 30.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A multi-color, magnet-backed button, made for my kid's costume inspired by the “President Loki” variant as seen in Marvel's Loki on Disney+.

The thickness of the button is different on the top and bottom, so you can achieve all 4 colors with manual filament swaps. Black → White → Red → Blue.

2 pair of 10x3mm neudymium / rare earth magnets hold quite well. You can either permanently glue, or just use Sugru or hot glue to trap them for removal/reuse later. Just make sure you match the pairs with the button and backing before and during the magnet installation.

I intentionally made the holes big enough (11x3.25mm) that the magnets were clearly not press-fit, since there'd be so much variance between anyone's printers and sourced magnets. That said, it'd be pretty easy to measure and print some shims if you truly refused to use glue.

Pairs nicely with this Loki “tiara” and a suit!

https://www.printables.com/model/144874-loki-tiara

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
571 KB
Largest file
540.8 KB

0 comments

See all