
Giá đỡ kìm cho bảng Skadis
- Downloads
- 3,491
- Likes
- 616
- Views
- 7,553
- Remixes
- 4
- Comments
- 110
Files 4 7.4 MB
- SkadisHolderForPliers-odd_1765626026.stepSTEP · 785.9 KB
- SkadisHolderForPliers-even_1765626027.stepSTEP · 764.1 KB
- SkadisHolderForPliers-even_1765626028.stlSTL · 2.9 MB
- SkadisHolderForPliers-odd_1765626029.stlSTL · 3 MB
Make a variant with AI
Build another version of this model.
Remix versions 4
Giá treo kìm gắn tường thông minh - Phụ kiện in 3D cho xưởng DIYByPiotrZiemian_1714697 · 05/03/2026
Holder kẹp đo Skådis (in 1 part, không cần supports!)Byimaginarypie_323217 · 04/28/2026
Giá treo cọ vẽ Skådis (không supports, in 1 mảnh)ByAndrew_598728 · 04/27/2026
Giá Đỡ Đồng Hồ Đo Cho IKEA SkadisBybarthy_koeln · 04/12/2025
Details
- Model ID
- #65708
- Category
- DIY
- Published
- License
- Creative Commons — Public Domain
Description
Simple, space efficient Skadis holder for pliers inspired by IKEA Skadis pliers holder (up to 8)
by Kai. It doesn't use anything from the original model except the idea, but the idea is a good one.
There are 2 versions with different hooks so that the holder can be chained into continuous row however long you need. If you need one, it doesn't matter which one you print, if you want continuous row, you need to alternate versions.
Print instructions
Print without supports placed on the top face oriented upside down.
Support
All my work is free and in the public domain when possible. If you find it valuable, you can support me on Ko-fi.
Skadis collection
If you are interested in other things for Skadis board from me, have a look at my Skadis collection on Printables.
Print spec
- Formats
- stepstl
- Model files
- 4
- Total size
- 7.4 MB
- Largest file
- 3 MB
110 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-

-

-


