Flexible leash poop bag holder

This is a simple dog poop bag holder that you can loop into a leash and use to hold a bag while walking. The knot in a tied-closed bag is pushed through the cross, and the elastic tension holds it in place.

I based this on a bunch of common online designs that are <$10, but why pay anything when you can make it out of 10 cents of plastic!

Recommended Print Settings:

Unfortunately it's hard to recommend settings for flex because materials can vary a bunch -- but here's what I used for my Overture TPU 95A:

• Layer height: 0.16 mm
• Line width: 0.45 mm
• Top layers: 4
• Bottom Layers: 4
• Perimeters: 2
  • I've also tried 1 and 3 and they both worked well enough!
• Infill: 20% Gyroid
  • I've also tried increasing the top/bottom layers to make it fully solid, and that worked fine too!

Let me know if you have any suggestions for other materials.