Skip to main content
F3D
Tháp Đựng Túi S-Bag Cho Roborock S8 Pro Ultra 1

2 images

Đồ Gia Dụng

Tháp Đựng Túi S-Bag Cho Roborock S8 Pro Ultra

By JoriHelin_357058

Downloads
26
Likes
7
Views
811
Comments
2

Files 3 874.3 KB

  • Roborock_S-bag_tower_block_1765625897.stlSTL · 10.8 KB
  • Roborock_S-bag_tower_lock_1765625898.stlSTL · 42.3 KB
  • Roborock_S-bag_tower_1765625899.stlSTL · 821.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

For easier use of S-bags on the Roborock S8 Pro Ultra base station. Adapter made previously worked just fine, untill bag got overly full and made a blockage through the adapter plate.

This version replaces original bag holder tower from the base station with one that accepts S-bags directly and no more issues removing the bag when it's full.

This is V1, still in testing.

No permanent modifications required to the base station. Accepts S-bags without modification.

  • Print all 3 pieces. 
  • Use 2 M4x20 screws and nuts to attach lock to the tower.
  • Remove old tower from the base station by unscrewing 3 screws.
  • Install new tower using original screws.
  • Install S-bag by sliding bottom in and press sides against the tower.
  • Slide the lock in place.

Coffee?
https://ko-fi.com/jorihelin

(I take no responsibility if you break your base station or any other issues that could arise from using the model. Print and use with your own risk.)

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
874.3 KB
Largest file
821.2 KB

2 comments

See all