Bộ phận thay thế Snapline (Hobbycreek)

This is a replacement element for Snapline (Hobbycreek) modular hoses used on the arms of their helping hands.

Once, I broke one element by twisting the arm too much so maybe you did it too or will ;p

Version

Description

Date

A.1

Initial Release

02/08/2021

A.2

Remove the waiting of 1200 seconds at the end of the print work in the gcode.

03/08/2021

Printing Instructions

1. Element
   • PETG for stiffness.
   • Layer Height: 0,2 mm
   • 2 Perimeters
   • No supports
   • 100% infill

Notes

• Only tested with Snapline (Hobbycreek) modular hose.
• If you print 2 parts to combine them, they won't work as smooth as with snapline due to the roughness. Just sand it and/or apply lubricant. Try also this one: Modular Hoses (Loc-line like) by Daniel Vitanza | Download free STL model | PrusaPrinters

Have a nice print !

Last note! I've spent quite a lot of time designing, iterating and prototyping on all my models. Therefore, if you enjoy them, please don't forget to like+download and then rate them, so that I can earn so prusaments to continue ;)