
Vợt pickleball phiên bản 2.0 có thể in được
Remix of Vợt pickleball in 3D cho máy in Prusa MK3/4 By RDPrintLab
- Downloads
- 86
- Likes
- 12
- Views
- 1,150
- Remixes
- 1
- Comments
- 3
Files 14 40.4 MB
- Paddle_v2.0_Face_1766460454.STEPSTEP · 24.5 KB
- Paddle_v2.0_HandleGrip_1766460455.STEPSTEP · 69.3 KB
- Paddle_v2.0_HandleGripPEG_1766460456.STEPSTEP · 20.1 KB
- Paddle_v2.0_HandleCap_1766460456.STEPSTEP · 64.4 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #6373
- Category
- Thể Thao & Ngoài Trời
- Published
- License
- Creative Commons — Attribution
Description
This is v2.0 of a paddle design that can be printed on a Prusa MK3/4 bed size (X×Y×Z, 250 × 210 × 210 mm).
Suggested filament per part(s):
- TPU - Handle Grip, Handle Cap
- PP - Body Infill, Handle (to help reduce weight)
- PETG/PET - Surface
- PLA - Handle Peg (you can try PETG/PET, but it was much easier for me to just print this in PLA)
Other Materials Required:
- (2x) round wooden dowel, 1/4in diameter, 60mm in length
- Glue/Epoxy
- Clamps
- Spare wood/flat surfaces
- Low Expectations
Printing Notes:
- I printed with a 0.6mm nozzle and 0.3mm layers.
- Check that the handle thickness is equal to the sum thickness of the two surfaces and the body infill (if you want to make the paddle as flush as possible).
- May need to adjust the Handle Cap height to fit flush against the Handle Grip; dependent on the material shrinkage.
Assembly Notes:
- Print two faces, and glue to each side of the body infill.
- Use the Handle Pegs to help align the Handle Grip. I glued the grip, you can also wrap the grip in place.
Final Thoughts:
I printed the body infill in TPU. I didn't have PP. The Surfaces were printed with CF PETG. Although the surfaces printed flat, they had a slight curve when I removed them from the build plate. I glued the Surfaces to the TPU Body Infill piece, and the TPU Body Infill piece inherited the curve from the Surfaces. Now I have a oddly curved paddle.
My paddle still works and delivers a nasty curve! But it is heavy!
I highly recommend ordering PP for the Body Infill. I anticipate PLA may also work for the Body Infill to produce a straight paddle, but it will likely still be heavy.
An ideal comfortable Pickleball paddle weight is about 7-8 ounces (198-227g), I think my paddle is close to 10-11oz (283-311g). I think PP will help lower weight significantly.
Print spec
- Formats
- stepstl
- Model files
- 14
- Total size
- 40.4 MB
- Largest file
- 18 MB













