Cách ly pin 18650 tối ưu cho in FDM

By Maspat971

Downloads: 76
Likes: 8
Views: 496
Remixes: 0
Comments: 2

Download all (.zip)· 6 files · 926.6 KB· 926.6 KB

Files 6 926.6 KB

Spacer_18650_1766267800.STLSTL · 37.9 KB
Spacer_18650_1x2_1766267801.STLSTL · 68.1 KB
Spacer_18650_1x3_1766267802.STLSTL · 95.8 KB
Spacer_18650-SupMal_1766267803.STLSTL · 188.1 KB
4x3_1766267804.STLSTL · 354.1 KB
Spacer_18650-SupFemelle_1766267805.STLSTL · 182.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #6350
Category: DIY
Published: 03/09/2025
License: Creative Commons — Attribution
Tags: battery
spacer
18650
18650battery
spacers
18650spacers

Show more tags Show fewer tags

Description

Spacer to be printed preferably in PETG.
Battery slot diameter 18.5 mm
Important spaces between the batteries (3 mm) to increase the air circulation
To be printed without supports, respect the printing direction of the stl
Tight fit system (0.12 mm)
Supports nickel strips up to 11 mm wide

Good printing

07/11/202 added three stl:

One 4x3 block (18650 slots are 19mm, not 18.5)

Two clip-on bms holders

Espaceur à imprimer de préférence en PETG.
Diamètre emplacement batterie 18.5 mm
Espaces important entre les batteries (3 mm) pour augmenter la circulation d'air
À imprimer sans supports, respectez le sens d'impression des stl
Système d'emboitement à jeu serré (0.12 mm)
Supporte les bandes de nickel jusqu'à 11 mm de large

Bonne impression

07/11/2022 ajout de trois stl:

Un bloc 4x3 (les emplacements 18650 sont de 19mm et non pas de 18.5)

Deux supports de bms clipsable