Giá đỡ khung MMU nghiêng 22.5 độ

My buffer sits above my printer and I didn't like how the tubes bent when using the original MMU2s frame mount.   I tried a horizontal one but didn't like how the front tube had to bend with tall prints.

My solution was to remix the original Prusa bracket to be half way between them at 22.5 degrees.   

While this is mostly a remix of the original, I have used the cross brace idea from @jfromel's horizontal one https://www.prusaprinters.org/prints/20114-mmu2s-horizontal-mount.

The modified control panel placement in my photos is universaljoint's underslung control panel mod: https://www.printables.com/model/140-mmu2-underslung-control-panel-mount

These brackets will also work with an MMU3 if you do not use the label plate and are not using the underslung control panel.  If you are using the underslung panel or want to keep the name plate, please use my MMU3 specific version.

Updates:

2022.02.21:  

• Added clean remix and step file. 
• Updated license to match Prusa's since it's GPL and requires the same license for remixes.

2022.03.05:

• Updated clean remix to v2 - Tweaked bottom catch to give more clearance for the X carriage.