Remix Gryphon P4 Nerf với pusher cơ bản

If you're interested in a prebuilt or custom blaster build, please check GryphonsAndMore on Etsy!

This is sort of hard to explain.

The Gryphon is a “nerf” style foam blaster by Flygonial.

There is a remix called Shirdal P4 by Skwiggums.  This remix has several notable aspects:

• Battery in grip
• Solenoid pusher
• Hurricane wheel flywheel cage

I have remixed the Shirdal back to be compatible with the original Gryphon geared mechanical pusher.  I have also tweaked most of the other files, sometimes for greater strength, more battery room, comfort, etc.

My filenames may not necessarily make a ton of sense.

I'll try to summarize my changes here:

• There are two versions of the grip: one with a 2-stage trigger (half pull revs, full pull fires dart) and one with the normal rev trigger.  The main trigger for the rev trigger version is quite cut down but still stays in okay.
• Magwell is changed to be compatible with the pusher cover mechanism from the 1.3 version of the Gryphon.
• Top pic rail has a hole added so it can be secured better to the top of the blaster.
• Flywheel cage is updated to the 33.5mm spacing for a deliberately lower FPS (usually within the FPS cap of many HvZ events).
• Flywheel cage has a version with a mini-muzzle (of sorts) integrated.
• Flywheel cage has a version with side picatinny rail mounts integrated.
• Flywheel cage and magwell have the top screw port moved higher.  This is so that you can use a longer screw to secure the flywheel cage to the magwell.  I was having issues getting a screw of just the right length, in order to mount this together but not interfere with the mag insertion.  Note that this means there are three holes on the right side of the flywheel cage; two for mounting to the magwell, and one for the wire cover (but if you use one of the right length, it will also help to mount everything to the magwell).
• Lower motor cover and foregrip have a hole added to secure them together with a screw.  I did not like how the motor cover only had one hole to secure it to the rest of the blaster.
• Scales for the main grip have a thumb divot added.  I also normally print these scaled up to 9mm, in order to thicken the grip and provide more battery room.
• Battery cover is expanded to be larger/deeper/taller.
• Battery cover has a hole added, and the main grip has a hole added.  The hole in the main grip is for a heatset insert (the same size insert as I've been using for the Meowser and Quik by OFD).  This allows the use of a screw (I use a thumbscrew) to hold the battery cover closed.

I think that's about it!

I've also been building them with other customized Gryphon parts I've made, such as new rear caps (such as sling points or a combo sling point/N-strike stock point), and my extended wire cover (which IMO makes inserting the wires in the pusher cover far easier).  I may be uploading those here also at some point, but my organizational system is a huge mess.  The remix parts here should be fully compatible with standard Gryphon 1.3 parts.