Giá đỡ điện thoại MX-5 Miata ND (chân đế)

I was in search for a phone holder for my Miata MX-5 ND. The only ones I found were ugly or required glueing or screwing something to the panel. 

Therefore I designed my own. This one is just clipped as you can see in the pictures. The pictures show it with a mounted magnetic holder I already had (removed bottom plate and thus could fix the ball with the holder using a screw).

As I believe in free stuff I also added the original Freecad file just in case you have to make modifications.

I printed it using Formfutura AplloX ASA with 40% gyroid infill. This worked for me

Have fun with it.

Update 2023-10-07: Added High and Medium version (for bigger phones). Updated also FreeCAD file. Pictures show Low version.

Update 2023-11-06: Increased diameter for screw heads, so more screws should fit. Changed HIGH version a little bit. Added also balls (in two sizes) for use with holders originally intended for vent outlets. These balls are intended to use with mold-in threads (for 4 mm screws).