Graffiti "Kure" bởi Causeturk

Hi there,
this is the "Kure" graffitti by the fantastic graffitti artist Causeturk. Thanks for this fantastic collaboration. I'm releasing all the files with the artists permission. Go and check out his Instagram (link below) and leave many likes and followings.

This print is not using multiextruders or multimaterial kits, it's only colorchanges in z-direction.

Feel free to leave some feedback in the comments and let us see your prints. If your an artist and your interested in 3D printing please approach me.

Print

Take a look at the .3mf sclic3r files, you can see all colorchanges and print settings there. I printed the pieces on a Prusa Mini.

This is printed with 0.2 mm layers and 3 z color changes. The color change itself and all relevant printing parameters can be seen and adjusted in the Slic3r .3mf files. The filaments I used are linked below.

Design:

Causeturk supplied me with the .svg files of this design and from there on I had only do do some slight changes to the design inf inkscape and than Fusion360. One has to decide on which parts of the graffitti should be extruded to wich z height, according to the colorchanges.

Links

Causeturk on Insta
https://www.instagram.com/causeturk/

Filament 1 Prusament Galaxy black:
https://shop.prusa3d.com/de/prusament/711-prusament-pla-prusa-galaxy-black-1kg.html

Filament 2 (gras green):
https://www.dasfilament.de/filament-spulen/pla-1-75-mm/60/pla-filament-1-75-mm-grasgruen?c=11

Filament 3 (black):
https://www.dasfilament.de/filament-spulen/pla-1-75-mm/363/pla-filament-1-75-mm-schwarz-matt?c=11

Filament 4 light green:
https://www.dasfilament.de/filament-spulen/pla-1-75-mm/119/pla-filament-1-75-mm-das-filament-gruen?c=11

inkscape (open source vector image editor)
https://inkscape.org/de/

Paint.Net (open source image editing software)
https://www.getpaint.net/index.html

How to colorchange:
https://www.help.prusa3d.com/en/article/color-change\_1687