Skip to main content
F3D
Hộp Đựng Pod "Airbubble" Cho Airvape Legacy 1

2 images

Sức Khỏe

Hộp Đựng Pod "Airbubble" Cho Airvape Legacy

By Arct1cF0x_1183021

Downloads
35
Likes
5
Views
366

Files 6 509.5 KB

  • airvape_pod_holder_x6_1768306459.STLSTL · 28 KB
  • airvape_pod_case_x10_1768306460.STLSTL · 88 KB
  • airvape_pod_holder_x10_1768306461.STLSTL · 43.2 KB
  • airvape_pod_case_x6_1768306462.STLSTL · 99.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#60659
Category
Sức Khỏe
Published

Description

The airvape legacy pods came with a paper case that quickly deteriorated so I designed this holder to keep all the pods in a compact container. Designed for screw-on pods, untested with the updated press fit pods but since they work for the same device they're probably the same thickness. Made versions for 6 pods and 10 pods (had 2 sets and lost a couple along the way), solidworks files are included in case you want a different number of pods. I like to put unused pods facing one way and the used facing the other to keep track. Flat bottom face to prevent the case from rolling around

Print Settings: 

Printed on my Voron Trident with a 0.8mm nozzle

Infill doesn't matter much, only the bottom corners should be infill. 

No support for the case

Support on build plate only for the holder, I used a single organic support on the handle

Print orientations are bad, sorry. Print the holder with the flat face down,

Read more Show less

Print spec

Formats
sldprtstl
Model files
6
Total size
509.5 KB
Largest file
147.5 KB

0 comments

See all